Welcome you visit Laizhou City, Xia Qiu Li Zhenhao Diamond Tools Factory website!
news list
contact us

Laizhou City, Xia Qiu Li Zhenhao Diamond Tools Factory



Moblie:Mr. Chen:18243291111

Mr. Cui:13506459929




Address:Industrial park Xiaqiu,Laizhou city

The current position:首页 > News > information > Connection of diamond wire saw
Connection of diamond wire saw
发布时间:2017-04-14       访问次数: 0   
Before the use of diamond wire saw, a closed loop. The operation method and steps are as follows:
1, the length of the two exposed wire rope = joint length.
2, the two ends of the wire rope into the steel joints, joints and adjacent springs should be seamless.
3, the diamond wire saw special buckling clamp, joint pressing buckle. Withhold, the first joint in the middle of buckling vise buckle rotates every 90 degrees withheld once; then at both ends of the joint clamp in order to withhold withhold; finally, the joint central once again placed in withholding withholding forceps;
Check the joint 4, rubber, with emery cloth will flash and burr removal.